External Parts Electric Rifles

Vertical Grip D|Boys. In ABS con sistema di aggancio picatinny. Vano interno porta batteria.

Sgancio scaricatore Cyma. In metallo, ambidestro, per serie M4/M16.

Calcio telescopico in Metallo per serie MP5-J Cyma.

Calcio Telescopico in Fibra per M733/XM177/CAR-15 Cyma. Compatibile con la maggior parte dei tubi calcio in commercio.

Tacche di Mira Flip-Up Specna Arms. In metallo, per slitte picatinny.

Tacca di Mira Flip-Up Specna Arms. In ABS, per slitte picatinny. Installata di fabbrica su tutta la serie AR EDGE™.

Tacca di Mira Flip-Up Specna Arms. In ABS, per slitte picatinny. Installata di fabbrica su tutta la serie AR EDGE™.

Calcio per serie M4 Big Dragon. In polimero rinforzato, con poggia spalla gommato.

SLITTA 20mm IN ALLUMINIO UTILIZZABILE SOLO SU MICRO UNITY O SIMILARI COLORE NERO

QDM Quick Disconnect Sling Mount Magpul. Firts MS1, MS2, MS3 and MS4 Multi Mission Slings, replacing their ends with a QD Swivel Mount Able to turn to 360°, dual side release tabs prevent accidental release, provides a further improvement to the Multi Mission Slings Series Steel Made, with a Melonite finish Weight 20g MADE IN THE USA

Magpul Paraclip Clip-style sling attachment point, provides weapon quick-release capabilities, Cross-Bolt Lock Bar allows the user to optionally lock the lever closed for extra security. Fits to most of the slings and sling swivels out there Made in Steel with Melonite finish and reinforced polymer MADE IN THE USA

RSA QD Rail Sling Attachment Magpul The RSA QD provides a forward attachment point for the Magpul MS4® Sling and other push-button QD slings. Made from corrosion resistant steel, mounts on 1913 Picatinny rail, and places the attachment point at an angle optimized for comfortable two-point sling use while maintaining easy push-button access. MADE IN THE USA

Sling Swivel Stud Magpul Sling Swivel and bipod adapter.  Threads directly into the rifle stock furniture. The set include 2 pieces MADE IN THE USA

RSA Rail Sling Attachment Magpul The RSA provides a low profile forward sling attachment point for the Magpul MS3® or MS4® and other clip-in systems. Made from nitrocarburized steel for wear and corrosion resistance, the RSA attaches to any 1913 Picatinny rail.  It has has passed stress tests of over 300 pounds while weighing in at a mere 1.3 ounces. MADE IN THE USA

M-Lok Rail Cover Type 1 Magpul These covers are low-profile and light weight that install directly onto M-LOK compatible systems. Made of an extremely heat resistant flexible material, these covers offer an enhanced gripping surface.  At 9.5” in length, they cover six full M-LOK slots but can be cut for customized length or to combine colors. Includes two Covers per package. MADE IN THE USA

M-Lok Rail Cover Type 1 Magpul These covers are low-profile and light weight that install directly onto M-LOK compatible systems. Made of an extremely heat resistant flexible material, these covers offer an enhanced gripping surface.  At 9.5” in length, they cover six full M-LOK slots but can be cut for customized length or to combine colors. Includes two Covers per package. MADE IN THE USA

M-Lok Rail Cover Type 1 Magpul These covers are low-profile and light weight that install directly onto M-LOK compatible systems. Made of an extremely heat resistant flexible material, these covers offer an enhanced gripping surface.  At 9.5” in length, they cover six full M-LOK slots but can be cut for customized length or to combine colors. Includes two Covers per package. MADE IN THE USA

M-Lok Rail Cover Type 2 Magpul These Covers are low-profile, two-piece covers that install directly onto most M-LOK aluminum hand guards (non-polymer). This pack of six M-LOK covers is non-orientation specific, which allows the user to mount them in any direction desired without affecting function. Includes six panels, each covering one M-LOK slot.MADE IN THE USA

M-LOK AFG Magpul Heir of the AFG Magpul (Advanced ForeGrip) Keeps all the charateristics of its predecessor with a more minimal and lightweight desing, improving the grip being even more comfortable in order to obtain a stadier stance and reducing recoil Fits on every M-Lok System RIS, the package includes all the hardware needed for the installation Weight: 36g  MADE IN THE USA

M-LOK AFG Magpul Heir of the AFG Magpul (Advanced ForeGrip) Keeps all the charateristics of its predecessor with a more minimal and lightweight desing, improving the grip being even more comfortable in order to obtain a stadier stance and reducing recoil Fits on every M-Lok System RIS, the package includes all the hardware needed for the installation Weight: 36g  MADE IN THE USA

The PRS QD Footman Loop is a machined aluminum replacement sling mount for the original PRS Stock. It is a direct replacement for AR15 / M16 and SR25 / M110 PRS Stock models. Features a 1.25" footman loop for direct attachment of webbing as well as an integrated push-button QD swivel socket. MADE IN THE USA

MBUS3 Front Sight Magpul Evolved from the legendary MBUS Magpul, this new generation on sights reduce weight and sizes, keeping all the best features of the older gen Made in an extremely tough and lightweight reinforced polymer, can be deployed with both hands Fits on Picatinny/Weaver, sits at standard AR-height when deployed MADE IN THE USA

MBUS3 Front Sight Magpul Evolved from the legendary MBUS Magpul, this new generation on sights reduce weight and sizes, keeping all the best features of the older gen Made in an extremely tough and lightweight reinforced polymer, can be deployed with both hands Fits on Picatinny/Weaver, sits at standard AR-height when deployed MADE IN THE USA

MBUS3 Front Sight Magpul Evolved from the legendary MBUS Magpul, this new generation on sights reduce weight and sizes, keeping all the best features of the older gen Made in an extremely tough and lightweight reinforced polymer, can be deployed with both hands Fits on Picatinny/Weaver, sits at standard AR-height when deployed MADE IN THE USA